Showing 1–10 of 23 results

Acid Washed Coconut Shell Carbon Block Cartridges

Benefits:

Acid Washed Coconut Shell Carbon Block Cartridges are highly effective at removing chlorine, chloramines, tastes, odours and many volatile chemicals from potable drinking water supplies. The carbon block filter cartridges are made from Acid washed coconut shell carbon. The carbon removes chlorine, chloramines, tastes, odours and most volatile chemicals. They are an excellent choice for residential, food service, commercial and industrial applications.

Features:

  • Acid Washed Coconut Shell Carbon Cartridge
  • Premium high capacity removes bad taste & odour, chlorine, chloramines and volatile chemicals
  • Enhanced dirt-holding capacity
Product Specifications: 
Part NO. Dimensions Micron Rating Initial PSI @ GPM Chlorine Taste & Odour Reduction @ Flow Rate
SMF CBC1005 21⁄2” x 10” (64 mm x 254 mm) 5 3.7 PSI @ 2 GPM (.3 BAR @ 8 Lpm) > 20,000 gallons @ 2 GPM (75,700L @ 7.6 Lpm)
SMF CBC1010 21⁄2” x 10” (64 mm x 254 mm) 10 3.7 PSI @ 2 GPM (.3 BAR @ 8 Lpm) > 20,000 gallons @ 2 GPM (75,700L @ 7.6 Lpm)
SMF CBC2005 21⁄2” x 20” (64 mm x 508 mm) 5 4.6 PSI @ 2 GPM (.3 BAR @ 8 Lpm) > 40,000 gallons @ 2 GPM (151,200L @ 7.6 Lpm)
SMF CBC10B05 41⁄2” x 10” (114 mm x 254 mm) 5 4.6 PSI @ 2 GPM (.3 BAR @ 8 Lpm) > 50,000 gallons @ 2 GPM (189,300L @ 7.6 Lpm)
SMF CBC10B10 41⁄2” x 10” (114 mm x 254 mm) 10 4.6 PSI @ 2 GPM (.3 BAR @ 8 Lpm) > 50,000 gallons @ 2 GPM (189,300L @ 7.6 Lpm)
SMF CBC20B05 41⁄2” x 20” (114 mm x 508 mm) 5 8.5 PSI @ 2 GPM (.3 BAR @ 8 Lpm) > 150,000 gallons @ 2 GPM (567,800L @ 15.1 Lpm)
SMF CBC20B10 41⁄2” x 20” (114 mm x 508 mm) 10 8.5 PSI @ 2 GPM (.3 BAR @ 8 Lpm) > 150,000 gallons @ 2 GPM (567,800L @ 15.1 Lpm)

Chlor-A-Soft Water Softener

Benefits:

A combination system that provides water softening, chlorine and chemical removal. Removes clear water iron and softens your water. Simple program set up, then relax. Just add water softening salt!

Features:

  • Softens water, removes iron and eliminates odour
  • Removes chlorine and volatile organic chemicals
  • Simple fully programmable electronic water softener that doesn’t waste any water
  • Self-diagnostic service features
  • Best efficiency water softener that uses 80% less salt than traditional water softeners
  • Latest modern design uses as little as 2.5lbs of water softening salt and 17 gallons of water per regeneration
  • Computerized design to measure exact water usage
  • Compact one-piece cabinet/twin tank design
  • Uses 80% less salt than traditional water softeners
  • Power outage protective cell
  • Lifetime warranty
  • 12 Volt AC uses less than $3/yr in electricity
  • Bypass valve

Doulton Ceramic Sterasyl Cartridges

Benefits:

The Doulton Sterasyl Ceramic Cartridges are third party validated to remove bacteria such as ecoli, vibrio cholera, shigella, salmonella typhi, klebsiella terrigena, cryptosporidium and giardia.

Features:

  • Fits universal standard 10” filter housings
  • Filtration to .5 micron/.9 absolute
  • Filtration efficiency of 99.99 percent
  • Highly efficient bacteriological filtration
  • Ideal for reverse osmosis pre or post filtration
Product Specifications: 
Part No. Dimensions Micron Rating Flow rate
CRF W9220402 2” x 9 3⁄4” (51 mm x 248 mm) 5 (.9 Absolute) .75 GPM @ 50 PSI (2.83 Lpm @ 3.4 BAR)
CRF W9220406 2 3⁄4” x 9 3⁄4” (70 mm x 248 mm) 5 (.9 Absolute) 1.6 GPM @ 50 PSI (6 Lpm @ 3.4 BAR)

 

Doulton RIO 2000 Filtration Module

Benefits:

The Doulton RIO 2000 unique 6 element filtration module is third party validated to remove bacteria such as ecoli, vibrio cholera, shigella, salmonella typhi, klebsiella terrigena, cryptosporidium and giardia.

Features:

  • Fits Jumbo and Big Blue 10” filter housings
  • Filtration to .5 micron/.9 absolute
  • Filtration efficiency of 99.99 percent
  • Highly efficient bacteriological filtration
  • Ideal for whole house applications after pre filtration for bacteria removal
Product Specifications: 
Part No. Dimensions Micron Rating Flow rate
CRF W9381000 4 1⁄2” x 10 (114 mm x 254 mm) 5 (.9 Absolute) 7 GPM @ 50 PSI (26 Lpm @ 3.4 BAR)

 

Doulton Ultra Carb Ceramic Cartridges

Benefits:

The Doulton Ultra Carb ceramic are third party validated to remove bacteria such as ecoli, vibrio cholera, shigella, salmonella typhi, klebsiella terrigena, cryptosporidium and giardia. The Ultra Carb ceramics also provides carbon filtration and ion exchange media. These additional filtration steps remove high levels of chlorine, organics, chemicals, lead and other heavy metals.

Features:

  • Fits Universal Standard 10” filter housings
  • Filtration efficiency of 99.99 percent
  • Highly efficient bacteriological filtration
  • Ideal for reverse osmosis pre or post filtration
  • Removes high levels of chlorine, organics, lead and other heavy metals
Product Specifications: 
Part No. Dimensions Micron Rating Flow rate
CRF W9223022 2 3⁄4” x 9 3⁄4” (70 mm x 248 mm) 5 (.9 Absolute) .75 GPM @ 50 PSI (2.83 Lpm @ 3.4 BAR)

 

Dual Gradient Density Polypropylene Cartridges

Benefits:

Dual Gradient Density Polypropylene Cartridges are manufactured with 100% pure polypropylene fibres and are sized to fit Jumbo filter housings. Our dual gradient polypropylene cartridges will reduce turbidity, dirt, grit, suspended matter, sand, rust and scale.

Features:

100 percent pure polypropylene cartridges
Sized to fit the Jumbo housings
Polypropylene cartridges form a true density for premium filtration
40˚ F to 100˚ F (4˚ C to 37˚ C) operating temperature
30 to 100 PSI operating range (2 BAR to 6 BAR)
Polypropylene dual gradient cartridges remove dirt, grit, sand, rust, suspended matter and turbidity
Multi-depth filtration
Product Specifications: 
Part No. Dimensions Micron Rating Initial PSI @ GPM Type
SMF DGD10BB2501 4 1⁄2” x 10” (114 mm x 254 mm) 25/1 < 1 PSI @ 10 GPM (.1 BAR @ 38 Lpm) Melt Blown
SMF DGD10BB2505 4 1⁄2” x 10” (114 mm x 254 mm) 25/5 < 1 PSI @ 10 GPM (.1 BAR @ 38 Lpm) Melt Blown
SMF DGD10BB5025 4 1⁄2” x 10” (114 mm x 254 mm) 50/25 < 1 PSI @ 10 GPM (.1 BAR @ 38 Lpm) Melt Blown
SMF DGD10BB7525 4 1⁄2” x 10” (114 mm x 254 mm) 75/25 < 1 PSI @ 10 GPM (.1 BAR @ 38 Lpm) Melt Blown
SMF DGD20BB2501 4 1⁄2” x 20” (114 mm x 508 mm) 25/1 < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) Melt Blown
SMF DGD20BB2505 4 1⁄2” x 20” (114 mm x 508 mm) 25/5 < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) Melt Blown
SMF DGD20BB5025 4 1⁄2” x 20” (114 mm x 508 mm) 50/25 < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) Melt Blown
SMF DGD20BB7525 4 1⁄2” x 20” (114 mm x 508 mm) 75/25 < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) Melt Blown

Enalka Neutralizing Cartridges

Benefits:

The Enalka Neutralizing Cartridge is clean, sanitized media by using ozonation for disinfection with no impurities being put into your drinking water supply. The Enalka Cartridge increases the calcium content in your water supply and increases the PH of distillation (5.8) to 6.8 and reverse osmosis water (6.0) to 7.0. As a result, your drinking water will no longer be acidic, eliminating heartburn and calcium deficiencies.

Features:

  • Raises PH of distilled water from 5.8 to 6.8 and reverse osmosis water from 6.0 to 7.0 eliminating acidic water
  • Increases the calcium content of drinking water
  • Enalka media is disinfected with ozone
  • No impurities added to your water
Product Specifications: 
Part No. Dimensions Micron Rating Thread Flow rate
SMF REM275X10 2” x 12” (50 mm x 305 mm) 10 1⁄4” (6 mm) .75 Lpm @ 10 PSI (2.83 Lpm @ .6 BAR)

EWS Econo Soft-Tec® Water Conditioner

Benefits:

The Sof-Tec Residential Water Conditioner chemically changes the calcium in hard water that normally builds up as scale on appliances to microscopic crystals, which then move through pipes and your appliances, leaving no residue on inside or outside surfaces.  In addition to removing calcium, the Soft-Tec Water Conditioner removes many other undesirable chemicals – chlorine, chloramines, and volatile and industrial chemicals among them.  As it uses a special resin bed to operate, no additional salt or electricity are required to run the unit.

The Econo model is a compact, wall-mountable unit operating at flow rates up to 5 gpm.

Features:

  • Easy setup & installation
  • No electrical power required
  • No drain or waste water
  • Bypass valve
  • No Maintenance or Repairs
  • No Backwash which lowers water consumption
  • No water softening salt to purchase

Granular Activated Coconut Shell Acid Washed Carbon Cartridges

Benefits:

The Granular Activated Coconut Shell Acid Washed Carbon Cartridge is clean carbon that is effective in removing chlorine, chloramines, tastes, odours, and many volatile chemicals from potable drinking water supplies. The Granular Activated Coconut Shell Acid Washed Cartridges are made from acid washed coconut shell carbon.

Features:

  • Premium high capacity bad taste & odour and chlorine taste & odour reduction
  • Enhanced dirt-holding capacity
Product Specifications: 
Part NO. Dimensions Micron Rating INITIAL PSI @ GPM Chlorine Taste & Odour Reduction @ Flow Rate
SMF GAC10 21⁄2” x 10” (64 mm x 254 mm) 10 1 PSI @ 10 GPM (.1 BAR @ 38 Lpm) > 30,000 gallons @ 1 GPM (11,400L @ 3.8 Lpm)
SMF GACBB10 41⁄2” x 10” (114 mm x 254 mm) 10 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) > 50,000 gallons @ 2 GPM (189,300L @ 7.6 Lpm)
SMF GACBB20 41⁄2” x 20” (114 mm x 508 mm) 10 8.5 PSI @ 4 GPM (.5 BAR @ 15.1 Lpm) > 150,000 gallons @ 4 GPM (567,200L @ 15.1 Lpm)

 

Jumbo Filter Housings

Benefits:

Jumbo filter housings for large capacity filtration requirements, including high flow or heavy turbidity applications. The Jumbo filter housings providing greater velocity, reducing the number of housings for high flow applications. The housings are available in both 10” and 20” lengths.

Features:

  • Available in 10” and 20” lengths
  • Pressure release for easy cartridge replacement
  • Double O-Ring seal that is leak proof
  • Maximum operating pressure 85 PSI (5 BAR)
  • Maximum operating temperature 100˚F (37˚C)
  • Burst pressure over 500 PSI (30 BAR)
  • Blue sumps with black caps and pressure release
  • FNPT pipe threads

Product Specifications: 

Part No. Dimensions Thread Length Initial PSI @ GPM Colour
FH 10BB075
13 1⁄8” x 7 1⁄4” (333 mm x 184 mm)
3⁄4” (19 mm)
10” (254 mm)
2 PSI @ 15GPM (0.1 BAR @ 57 Lpm)
Blue
FH 20BB075
23 3⁄8” x 7 1⁄4” (594 mm x 184 mm)
3⁄4” (19 mm)
20” (508 mm)
2 PSI @ 15GPM (0.1 BAR @ 57 Lpm)
Blue
FH 10BB100
13 1⁄8” x 7 1⁄4” (333 mm x 184 mm)
1” (25 mm)
10” (254 mm)
1 PSI @ 15GPM (0.1 BAR @ 57 Lpm)
Blue
FH 20BB100 23 3⁄8” x 7 1⁄4” (594 mm x 184 mm) 1” (25 mm) 20” (508 mm) 1 PSI @ 15GPM (0.1 BAR @ 57 Lpm) Blue